Requirements
K3s is very lightweight, but has some minimum requirements as outlined below.
Whether you're configuring K3s to run in a container or as a native Linux service, each node running K3s should meet the following minimum requirements. These requirements are baseline for K3s and its packaged components, and do not include resources consumed by the workload itself.
Prerequisites
Two nodes cannot have the same hostname.
If multiple nodes will have the same hostname, or if hostnames may be reused by an automated provisioning system, use the --with-node-id
option to append a random suffix for each node, or devise a unique name to pass with --node-name
or $K3S_NODE_NAME
for each node you add to the cluster.
Architecture
K3s is available for the following architectures:
- x86_64
- armhf
- arm64/aarch64
- s390x
Prior to May 2023 releases (v1.24.14+k3s1, v1.25.10+k3s1, v1.26.5+k3s1, v1.27.2+k3s1), on aarch64/arm64
systems, the kernel must use 4k pages. RHEL9, Ubuntu, Raspberry PI OS, and SLES all meet this requirement.
Operating Systems
K3s is expected to work on most modern Linux systems.
Some OSs have additional setup requirements:
- SUSE Linux Enterprise / openSUSE
- Red Hat Enterprise Linux / CentOS / Fedora
- Ubuntu / Debian
- Raspberry Pi
It is recommended to turn off firewalld:
systemctl disable firewalld --now
If you wish to keep firewalld enabled, by default, the following rules are required:
firewall-cmd --permanent --add-port=6443/tcp #apiserver
firewall-cmd --permanent --zone=trusted --add-source=10.42.0.0/16 #pods
firewall-cmd --permanent --zone=trusted --add-source=10.43.0.0/16 #services
firewall-cmd --reload
Additional ports may need to be opened depending on your setup. See Inbound Rules for more information. If you change the default CIDR for pods or services, you will need to update the firewall rules accordingly.
It is recommended to turn off firewalld:
systemctl disable firewalld --now
If you wish to keep firewalld enabled, by default, the following rules are required:
firewall-cmd --permanent --add-port=6443/tcp #apiserver
firewall-cmd --permanent --zone=trusted --add-source=10.42.0.0/16 #pods
firewall-cmd --permanent --zone=trusted --add-source=10.43.0.0/16 #services
firewall-cmd --reload
Additional ports may need to be opened depending on your setup. See Inbound Rules for more information. If you change the default CIDR for pods or services, you will need to update the firewall rules accordingly.
If enabled, it is required to disable nm-cloud-setup and reboot the node:
systemctl disable nm-cloud-setup.service nm-cloud-setup.timer
reboot
Older Debian release may suffer from a known iptables bug. See Known Issues.
It is recommended to turn off ufw (uncomplicated firewall):
ufw disable
If you wish to keep ufw enabled, by default, the following rules are required:
ufw allow 6443/tcp #apiserver
ufw allow from 10.42.0.0/16 to any #pods
ufw allow from 10.43.0.0/16 to any #services
Additional ports may need to be opened depending on your setup. See Inbound Rules for more information. If you change the default CIDR for pods or services, you will need to update the firewall rules accordingly.
Raspberry Pi OS is Debian based, and may suffer from a known iptables bug. See Known Issues.
Standard Raspberry Pi OS installations do not start with cgroups
enabled. K3S needs cgroups
to start the systemd service. cgroups
can be enabled by appending cgroup_memory=1 cgroup_enable=memory
to /boot/cmdline.txt
.
Example cmdline.txt:
console=serial0,115200 console=tty1 root=PARTUUID=58b06195-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait cgroup_memory=1 cgroup_enable=memory
With Ubuntu 21.10 to Ubuntu 23.10, vxlan support on Raspberry Pi was moved into a separate kernel module. This step in not required for Ubuntu 24.04 and later.
sudo apt install linux-modules-extra-raspi
For more information on which OSs were tested with Rancher managed K3s clusters, refer to the Rancher support and maintenance terms.
Hardware
Hardware requirements scale based on the size of your deployments. Minimum recommendations are outlined here.
Spec | Minimum | Recommended |
---|---|---|
CPU | 1 core | 2 cores |
RAM | 512 MB | 1 GB |
Resource Profiling captures the results of tests to determine minimum resource requirements for the K3s agent, the K3s server with a workload, and the K3s server with one agent. It also contains analysis about what has the biggest impact on K3s server and agent utilization, and how the cluster datastore can be protected from interference from agents and workloads.
If deploying K3s with embedded etcd on a Raspberry Pi, it is recommended that you use an external SSD. etcd is write intensive, and SD cards cannot handle the IO load.
Disks
K3s performance depends on the performance of the database. To ensure optimal speed, we recommend using an SSD when possible. Disk performance will vary on ARM devices utilizing an SD card or eMMC.
Networking
The K3s server needs port 6443 to be accessible by all nodes.
The nodes need to be able to reach other nodes over UDP port 8472 when using the Flannel VXLAN backend, or over UDP port 51820 (and 51821 if IPv6 is used) when using the Flannel WireGuard backend. The node should not listen on any other port. K3s uses reverse tunneling such that the nodes make outbound connections to the server and all kubelet traffic runs through that tunnel. However, if you do not use Flannel and provide your own custom CNI, then the ports needed by Flannel are not needed by K3s.
If you wish to utilize the metrics server, all nodes must be accessible to each other on port 10250.
If you plan on achieving high availability with embedded etcd, server nodes must be accessible to each other on ports 2379 and 2380.
The VXLAN port on nodes should not be exposed to the world as it opens up your cluster network to be accessed by anyone. Run your nodes behind a firewall/security group that disables access to port 8472.
Flannel relies on the Bridge CNI plugin to create a L2 network that switches traffic. Rogue pods with NET_RAW
capabilities can abuse that L2 network to launch attacks such as ARP spoofing. Therefore, as documented in the Kubernetes docs, please set a restricted profile that disables NET_RAW
on non-trustable pods.
Inbound Rules for K3s Nodes
Protocol | Port | Source | Destination | Description |
---|---|---|---|---|
TCP | 2379-2380 | Servers | Servers | Required only for HA with embedded etcd |
TCP | 6443 | Agents | Servers | K3s supervisor and Kubernetes API Server |
UDP | 8472 | All nodes | All nodes | Required only for Flannel VXLAN |
TCP | 10250 | All nodes | All nodes | Kubelet metrics |
UDP | 51820 | All nodes | All nodes | Required only for Flannel Wireguard with IPv4 |
UDP | 51821 | All nodes | All nodes | Required only for Flannel Wireguard with IPv6 |
TCP | 5001 | All nodes | All nodes | Required only for embedded distributed registry (Spegel) |
TCP | 6443 | All nodes | All nodes | Required only for embedded distributed registry (Spegel) |
Typically, all outbound traffic is allowed.
Additional changes to the firewall may be required depending on the OS used.
Large Clusters
Hardware requirements are based on the size of your K3s cluster. For production and large clusters, we recommend using a high-availability setup with an external database. The following options are recommended for the external database in production:
- MySQL
- PostgreSQL
- etcd
CPU and Memory
The following are the minimum CPU and memory requirements for nodes in a high-availability K3s server:
Deployment Size | Nodes | VCPUS | RAM |
---|---|---|---|
Small | Up to 10 | 2 | 4 GB |
Medium | Up to 100 | 4 | 8 GB |
Large | Up to 250 | 8 | 16 GB |
X-Large | Up to 500 | 16 | 32 GB |
XX-Large | 500+ | 32 | 64 GB |
Disks
The cluster performance depends on database performance. To ensure optimal speed, we recommend always using SSD disks to back your K3s cluster. On cloud providers, you will also want to use the minimum size that allows the maximum IOPS.
Network
You should consider increasing the subnet size for the cluster CIDR so that you don't run out of IPs for the pods. You can do that by passing the --cluster-cidr
option to K3s server upon starting.
Database
K3s supports different databases including MySQL, PostgreSQL, MariaDB, and etcd. See Cluster Datastore for more info.
The following is a sizing guide for the database resources you need to run large clusters:
Deployment Size | Nodes | VCPUS | RAM |
---|---|---|---|
Small | Up to 10 | 1 | 2 GB |
Medium | Up to 100 | 2 | 8 GB |
Large | Up to 250 | 4 | 16 GB |
X-Large | Up to 500 | 8 | 32 GB |
XX-Large | 500+ | 16 | 64 GB |